Workouts
Please ensure you read all the steps and thoroughly understand the instructions before you begin to install your stabilizing bar on your rebounder.
For more information and a video guide, visit Needak Manufacturing directly.
Tools required
1 x long screwdriverChoose two legs
Place your rebounder, unfolded, on its back, with the legs pointed upwards. Choose any two legs separated by one leg (don’t choose two legs right next to each other).Remove rubber leg tips from chosen legs
Remove the rubber leg tips from the two legs you’ve chosen. Tips may be removed by cradling the leg in your fingers and pushing them off with your thumbs or with a screwdriver. (Do not slip with the screwdriver or you may injure yourself or damage the jump mat). Apply petroleum jelly to the inside of the leg tips for easier future replacement.Attach sleeve to legs
Turn the rebounder to its side and slide the vertical bar/sleeve over the rebounder legs so that the long side is pointed away from the legs, and slide the rubber leg tips back onto the feet.Position the rebounder upright
Put the rebounder in its normal standing position. You should now have two protruding pieces that are pointed upwards, ready for the rest of the stabilizing bar.Assemble the bar
Take the two curved pieces and pop them into each of the protruding leg attachments. They have 3 holes in them which you can use to determine the best height for yourself. Most of our customers use the top height for maximum stability. The other end of the curved pieces click into each other via the small button on one side and hole on the other. At times, it may be slightly difficult to get them to line up due to the tension the stabilizing bar has against the rebounder frame – just do your best and it will eventually click in. This tension holds the stabilizing bar firm against your rebounder, making it more solid.Ready to bounce!
You can always adjust the height by pressing the button in and sliding the curved pieces up and down. This may be slightly tough at times due to the rigidity of the stabilizing bar, so we suggest you try to find a height you like and leave it at that. Note that the rebounder cannot be folded with the stabilizing bar attached.For more information and a video guide, visit Needak Manufacturing directly.
